↓ Skip to Main Content
Hangar notes

Hangar notes

Main Navigation

  • Home
  • Building the tail
  • Progress Blog
  • The fuselage
  • The powerplant
  • The wings

Category: Spitfire build

Work on the windscreen

By admin Posted on July 31, 2015 Posted in Spitfire build

I had used the supplied Mick Reeves vinyl cutouts to finish the frame of the windscreen. I painted them and stuck them on. This was OK, but not very realistic looking. Others have made complete new fibreglass windscreen structures, but …

Work on the windscreen Read more »

Putting it all together

By admin Posted on September 9, 2014 Posted in Spitfire build

I’ve started work on the Spitfire again after a break. The break was partly due to work commitments and partly because I was overwhelmed by how much more work was left to do! I’ve decided to get the model flying first …

Putting it all together Read more »

Aligning the fuselage with the wing root rib

By admin Posted on October 24, 2013 Posted in Spitfire build

I’ve had a couple of questions about this. This is to correct for a slight mismatch between the wing root rib and the wing root shape on the fibreglass fuselage. To change the fuselage rib shape to align more accurately …

Aligning the fuselage with the wing root rib Read more »

Big, boofy batteries

By admin Posted on August 8, 2013 Posted in Spitfire build No Comments

I’ve constructed a ply framework in the front end of the Spit to take the four batteries – 4x  5000mah Lipo 6S. They are held in by webbing straps with Velcro closures. I had to use my sewing skills (not …

Big, boofy batteries Read more »

More rivetting pictures

By admin Posted on August 8, 2013 Posted in Spitfire build No Comments

Here’s the undercarriage doors with stick-on rivets and a final airbrushed coat of acrylic paint. They look a bit obtrusive in the big close-up shot, but much more realistic when viewed by eye. The vinyl dots are silver, so you …

More rivetting pictures Read more »

Rivets, rivets everywhere

By admin Posted on August 8, 2013 Posted in Spitfire build No Comments

I’ve been spraying primer on the tail and adding some rivets. I’ve used the Mick Reeves tapes on the tail. They are thin vinyl tapes cut with holes at the correct spacing. The method is to stick the vinyl along the rivet line then fill …

Rivets, rivets everywhere Read more »

More exhausting!

By admin Posted on August 8, 2013 Posted in Spitfire build No Comments

I airbrushed the exhausts as recommended in Mick’s instructions and came out with a realistic looking slightly rusty finish. They now look like metal, not ABS plastic!

An exhausting time

By admin Posted on June 29, 2013 Posted in Spitfire build No Comments

I’ve been putting together the dummy engine exhaust stubs. I need to do this and attach them to the airframe before I can fit the engine firewall. There’s a certain amount of jigsaw-puzzle figuring out to get this stuff to all …

An exhausting time Read more »

A long project

By admin Posted on June 2, 2013 Posted in Spitfire build 1 Comment

I started building this model Spitfire in January 2012. Now, 18 months later, there is still a lot of work to be done. I’m enjoying the build, and as you might guess, I’m not rushing anything! I am not intending to …

A long project Read more »

Hi there

By admin Posted on May 25, 2012 Posted in Spitfire build No Comments

Welcome to this blog where you can see details of my build of the Mick Reeves 1/4 scale Spitfire.

© 2026 Hangar notes | Powered by Responsive Theme